Manual Atika BMS250 (page 19 of 101) (English, German, Dutch, Danish, French, Polish, Swedish)

519289

Zoom out

Zoom in

1/101

Normal intended use

 The bench-type circular saw is intended exclusively for

ripping and cross-cutting solid wood and panel materials

such as chipboard, core-board and medium density

fiberboard with square or rectangular cross-section using

carbide tipped saw blades, whereby only saw blades

conforming to EN 847-1 are accepbench.

 The use of saw blades made of HSS steel (high-alloy high

speed steel) is not permitted since this steel is hard and

brittle. Risk of injury through saw blade breakage and

expulsion of saw blade pieces.

 Cutting round material (posts, firewood, etc.) is not

permitted.

 The diameter of the saw blade must lie between 245 and

254 mm.

 Only workpieces which have been securely mounted and

aligned can be processed.

 The intended usage also includes compliance with the

operating, servicing and repair conditions prescribed by

the manufacturer and following the safety instructions

included in the instructions.

 The relevant accident prevention regulations for the

operation as well as the other generally acknowledged

occupational medicine and safety rules must be complied

with.

 Any other use is deemed not to be use as prescribed. The

manufacturer is not liable for any type of damage resulting

from this: the user bears the sole risk.

 Independently made alterations to the circular saw preclude

any liability of the manufacturer for resulting damages of

any kind.

 The circular saw may only be equipped, used and

serviced by persons who are familiar with these and have

been instructed in the hazards. Repair works may only be

carried out by us or by a customer service agent nominated

by us.

 The machine may not be used in a potentially explosive

environment or be exposed to the rain.

 Metal parts (nails, etc.) must be removed from the timber to

be sawn.

Residual risks

Even if used properly, residual risks can exist even if the

relevant safety regulations are complied with due to the design

determined by the intended purpose.

Residual risks can be minimised if the “Safety information” and

the “Intended usage” as well as the whole of the operating

instructions are observed.

Observing these instructions, and taking proper care, will

reduce the risk of personal injury or damage to the equipment.

 Danger of injury of fingers and hands by the tool (saw

blade) or work piece, e.g. when replacing the saw blade.

 Injury from parts of the workpiece spinning off.

 Throwback of the workpiece or workpiece parts.

 Breakage and expulsion of saw blade.

 Risk from electricity, by using non-standard electrical

connections.

 Touching live parts of opened electrical components.

 Impairment of hearing when working on the machine for

longer periods of time without ear protection.

 Emission of harmful timber dust when operating without

exhaust suction.

In addition, in spite of all the precautionary measures taken,

non-obvious residual risks can still exist.

Safety instructions

Wood processing machines can be dangerous when

used improperly. The use of electrical tools requires the

observation of basic safety precautions to eliminate risk of

fire, electrical shock and personal injuries.

Before commissioning this product, read and keep to the

following advice. Also observe the preventive regulations

of your professional association and the safety provisions

applicable in the respective country, in order to protect

yourself and others from possible injury.

Pass the safety instructions on to all persons who work

with the machine.

Keep these safety instructions in a safe place.

 Make yourself familiar with the equipment before using

it, by reading and understanding the operating

instructions.

 Be observant. Attend to what you do. Start working with

rationality. Do not use the device when you are tired or

under the influence of drugs, alcohol or medicaments.

One moment of carelessness when using the device

can result in serious injuries.

 Avoid unusual posture. Provide a safe standing position

and keep at any time the balance. Do not lean forward.

 Wear suitable work clothes:

− do not wear loose-fitting clothes or jewellery; they can

catch in moving parts.

− slip-proof shoes

− wear a hair-net if your hair is long

 Wear protective clothing:

− ear protection (sound pressure levels at the workplace

usually exceed 85 dB(A)

− safety goggles

− Dust mask with work activities generating dust

− Gloves when replacing the saw blade

 Only operate the circular saw on a

− solid

− level

− slip-free

− vibration free surface

 Keep your workplace in an orderly condition! Untidiness

can result in accidents.

 Take into consideration environmental influences:

− Do not expose the saw to rain.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atika BMS250 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish as an attachment in your email.

The manual is 4,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atika BMS250 Manual

Product: