475723
29
Zoom out
Zoom in
Previous page
1/135
Next page
P
P
o
o
s
s
s
s
i
i
b
b
l
l
e
e
f
f
a
a
u
u
l
l
t
t
s
s
Before each fault clearance
switch off device
ake
ector
After each fa heck all security installations.
wait for stop of chain saw
apply the chain br
pull off the spark plug conn
wear gloves
ult into operation and recclearance, put
Fault Possible cause Removal
Motor does not start  Incorrect starting sequence Â
 Air filter contaminated
Cranking mechanism defective
Observe the correct starting sequence
replace the air filter
choke to the
or replace
Â
 Fuel filter fouled
 Spark plug fouled
 No fuel supply
Fault in the fuel line
Â
Â
 Engine flooded.
Carburettor defective
Â
 Clean or
 Clean or replace the fuel filter
g
 Clean or replace the spark plu
 Fill the fuel tank. Bring the
correct starting position. Clean
the fuel filter
 Check the fuel line for kinks or damages
Replace the cranking rope: Replace the
recuperating spring
 Screw off, clean and dry the spark plug.
Then pull the cranking rope several times
and reinstall the spark plug.
 Contact the customer service
Engine starts and is stalled
immediately
Incorrect idle adjustment   Contact the customer service
Chain saw does not work with
full power
 Machine overloaded.
Chain edgeless/damaged
Â
sted
g sawing
 Air filter contaminated
 Carburretor incorrectly adju
 Silencer blocked
 Do not excessively press durin
Chain must be regrinded or exchanged
Â
 Clean or replace the air filter
 Contact the customer service
r
 Clean the outlet of the silence
Chain saw works with
interruptions (sputters) . Check the
 Carburretor incorrectly adjusted
 Spark plug fouled
 Contact the customer service
 Clean or replace the spark plug
spark plug connector
Chain does not run
 Chain brake applie
29
d
 Release chain brake
Chain saw picks, vibrates
does not saw correc
or
tly
 Chain edgeless/damaged
ctly (teeth face to
 or exchanged
n t sion
 Chain tension
 Chain not assembled corre
)
wrong direction
Chain must be regrinded
 Check and adjust chai en
 Assemble chain again
Saw chain is hot  no oil in the tank
oil flow canal blocked
Â
high
on
Â
ain tension
ded or exchanged
ation
 chain tension too
 Chain edgeless
 Incorrect chain lubricati
 Refill oil
Clean oil flow canal
 Adjust ch
 Chain must be regrin
 Adjust the chain lubric
no saw chain lubrication  no oil in the tank
 oil flow canal blocked
rication
 Incorrect chain lub
 Refill oil
 Clean oil flow canal
chain lubrication
 Adjust the
Smoke  Incorrect fuel mixture
 Carburretor incorrectly adjusted
tio of mixture 40:1
e
 Use two-stroke oil, ra
 Contact the customer servic
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BKS 38 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BKS 38 A in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 6,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info