475723
23
Zoom out
Zoom in
Previous page
1/135
Next page
23
Check
B befo
B af
B during sawing regularly all 10 minutes
d saw chain and a sufficient
influence the durability.
B in temperature it
expands and needs to be reclamped.
the saw chain tension:
re start of work
ter the first steps
Only with a correct clampe
lubrication you can
L Please observe the following:
B a new saw chain must be rest retched more frequently.
case of heating of chain to operating
After finishing the sawing works release tension of saw
erge
B guide clamp it again
chain as in case of cooling too high tensions would em
in the saw chain.
if chain flackers or comes out of the
immediately.
P
P
r
r
e
e
p
p
a
a
r
r
i
i
n
n
g
g
f
f
o
o
r
r
c
c
o
o
m
m
m
m
i
i
s
s
s
s
i
i
o
o
n
n
i
i
n
n
g
g
L aw is supplied without saw chain oil and
fuel filling.
Fill the saw ation" and
uelling".
The chain s
chain as described under "Chain lubric
"F
Chain lubrication
operate the chain saw without lubrication. Any
se without chain saw oil may result in damage of the
power of the chain depends on the
autom
L Never
u
chain saw and guide bar.
The durability and cutting
optimal lubrication. During operation the saw chain is
atically wetted with oil.
Filling up saw chain oil
Stop the engine and wear protective
gloves.
Avoid eye and skin contact.
Â
Put the chain saw on a suitable base and unscrew the oil
(1
C Fill the oil tank with bio-degradable chain saw
dhering oil r filling use a
tank lock 1).
a (order no. 400144). For easie
funnel.
When filling observe that no dirt reaches the oil tank.
N
when using oil which is not allowed for chain saws.
Screw on the oil tank lock again.
ever use recycled oil or used oil. The guarantee expires
Checking the chain lubrication
chain
brication.
chain lubrication by
on the chain saw and holding it with the pike in
Never operate the chain saw without functioning
lu
Check the function of the automatic
switching
direction of a carton or paper on the ground.
Do not get in contact with the ground with the chain. Keep a
ck despite full oil
safe distance of 20 cm.
If an increasing oil track is caused when checking it the oil
automatic works faultless. If there is no oil tra
tank:
Â
Clean the oil flow channel (19).
If this is not s
B uccessful please contact the customer
service.
Â
Adjust the chain lubrication:
See also the instructions under "Maintenance /
cleaning: Adjusting the chain lubrication".
F
F
u
u
e
e
l
l
l
l
i
i
ng
ng
andling fuel
open flames
(risk of explosion).
Utmost care is required when h
and oil. Do not smoke. Keep away
This product is operated by a mixture from regular
Petrol: ct
Do not fill in leaded petrol,
fuels.
Do t than 91
s due to
Tw
oil for air-cooled engines.
petrol (unleaded) and two-stroke engine oil.
ane number at least 91 ROZ unleaded O
diesel or other non-approved
use petrol having a smaller octance number
no
ROZ. This may lead to severe engine damage
increased engine temperatures.
If you frequently operate the product at high speeds, you
should
use petrol with a higher octane number.
CThe use of unleaded petrol is recommended for envi-
ronment protection reasons.
o-stroke engine oil:
acc. to JASO FC or ISO EGD specifications
Do only use two-stroke engine
M
M
i
i
x
x
i
i
n
n
g
g
Ratio of mixture 40:1
Petrol Two-stroke engine oil
1 litre 0,025 litres
2 litres 0,050 litres
5 litres 0,125 litres
10 litres 0,250 litres
sure the oil quantity accu mall deviation of it
large effect on the ratio of mixture in particular for
fuel quantities.
change the ratio of m will lead to more
Mea rately as a s
has a
small
Do not ixture. This
residues of combustion, a higher fuel consumption, a
decrease of output or damages to the engine.
Mix petrol and oil in the supplied fuel mixing can (38).
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BKS 38 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BKS 38 A in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 6,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info