Manual Atika ASP 10-1350 (page 22 of 88) (English, German, Dutch, Danish, French, Polish, Swedish)

519272

Zoom out

Zoom in

1/88

 Adjusting the table height

Upper table plate position for logs up to 59 cm

Middle table plate position for logs up to 85 cm

Lower table plate position for logs up to 135 cm

 Adjusting the splitting cross:

1. Loosen fixing screw.

2. Move the splitting cross to the required position.

3. Mount fixing screw.

 Splitting short wood:

1. Upper position of table plate.

2. Place the log on the splitter’s table plate.

L Only split the logs in the direction of the wood fibres.

3. Hold the log tight with the clamping claws.

 Splitting long wood:

1. Middle or low

position of table

or base.

2. Remove the

splitting cross.

3. Place the log on

the splitter’s table

or base.

L Possible malfunction when cleaving logs: The log to

be cleaved is not cleaved right through, jams on the cleaving

blade and is pulled up during the blade’s return movement. It

is no longer possible to release the log manually.

In this case, proceed as follows:

1. Switch off the device.

2. Depending on the log still to be cleaved fix the table plate

(6) in the upper position or swing aside the table (7).

3. Switch on the device and continue the splitting operation.

¾ Never try to split two logs at once.

¾ Never try to remove or replace the log during the splitting

process.

L Never try to force the splitting of the log by maintaining

the pressure for several seconds. This can lead to damage

to the machine.

Position the log on the table again and repeat the splitting

phase, or put the log on one side.

How to release a jammed log?

There is a risk of knotted logs getting stuck during the

splitting process.

1. Switch machine off and disconnect the power.

2. Carefully move the stuck log backwards and forwards to

loosen it.

Never hammer on the stuck log.

Never use a saw to cut the stuck log out of the

machine.

Do not enlist the aid of a second person - this is a one-

man job.

 Finishing work:

¾ Bring the splitting blade to the lower position (run-in

state).

¾ Release one of the control handles.

¾ Switch the machine off and disconnect the power.

¾ Follow the care and maintenance instructions.

1. Split logs

up to 59

cm on the

table plate

(6).

2. Split logs

up to 89

cm on the

table (7).

Pull out

the table

plate (A).

3. Split logs

up to135

cm on the

base (10).

Press the

locking

lever (8)

down and

swing

aside the

table (7).

Fixing screw

Splitting

cross

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atika ASP 10-1350 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atika ASP 10-1350 Manual

Product: