519276
17
Zoom out
Zoom in
Previous page
1/53
Next page
16
Contents
EC Declaration of Conformity 16
Extent of delivery 16
Characteristics noise values 16
Symbols machine / operating manual 16
Normal intended use 17
Risidual risks 17
Safe working 17
Preparing for commissioning and installation 19
Start-up 19
Working instructins 20
Maintenance and Care 22
Transport 22
Storage 23
Guarantee 23
Maintenance and cleaning schedule 23
Description of device / spare parts 24
Possible faults 25
Technical data 26
EC Declaration of Conformity
according to Directive 98/37 EC
ATIKA GmbH & Co. KG
Schinkelstraße 97 59227 Ahlen - Germany
declare under our sole responsibility, that the device
Surface planing and thicknessing machine type / model
ADH 204
to which this declaration relates corresponds to the relevant
basic safety and health requirements of the Directive 98/37/EC,
and to the requirements for the other relevant Directives:
2004/108/EG, 2006/95/EG,
and that the above-named machine agrees with the model,
which received the EC type-examination certificate
Z1A 06 08 41469 280
Notified body:
TÜV SÜD Product Service GmbH
Ridlerstr. 65, 80339 Munich
No.: 0123
Ahlen, 03.07.2007 A. Pollmeier, management
Characteristics noise values
EN ISO 3744
Machine used as surface planer and thicknesser with standard
cutting blades.
Noise power level Sound pressure level at the workplace
L
WA
= 105,9 dB(A) L
pA
= 92,9 dB(A)
The factor of measurement uncertainty is 2 dB.
The values given are emission values and must therefore not
simultaneously represent safe workplace values too. Although there is
a relationship between emission and immersion levels, it can be
reliably deduced whether additional precautionary measures are
necessary or not. Factors, which can influence the immersion level
currently existing at the workplace include the duration of the effects,
the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible
workplace values can also vary from country to country. This
information should however enable an improved assessment of the
danger and risk to be carried out.
Extent of delivery
Surface planing and thicknessing machine ADH 204
Shavings exhaustor hood
Shavings exhaustor connector
1 pushing block
1 pushing bar
Blade shaft guard
Guide plate
Crank handle for height adjustment
Cutting blade setting gauge
4 rubber feet
Installation tools
Fasteners
Operating manual
After unpacking, check the contents of the box
! That it is complete
! Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Symbols machine
Carefully read
operator’s
manual and the
safety
instructions
before starting
the machine and
Shut off engine
and remove power
cord before
performing
cleaning,
maintenance or
repair work.
observe the instructions when
operating.
Risk of finger and
hand injury by
the cutting blade.
Do not expose to
rain. Protect
against humidity.
Wear eye and ear
protection
Wear dust mask.
Wear protective
gloves.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika ADH 204 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika ADH 204 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info