692560
23
Zoom out
Zoom in
Previous page
1/32
Next page
EN 23
Remove these special pyrolysis guide rails after the cleaningprocess.
3. Select ‘Pyrolysis’ with the function knob and selection knob.
4. Select the desired cleaning intensity:
Low: approximately 3 hours
Average: approximately 3,5 hours
High: approximately 4 hours
Only the cleaning intensity can be selected. The time is fixed and depends on the
selected cleaning intensity.
5. Touch the confirm key to start pyrolysis clean.
After a certain period the oven door will be locked automatically for your own safety (once
the temperature reaches 250 °C).
An unpleasant smell may be released from the oven during the cleaning process.
The oven door can be opened once the appliance has cooled down (after the end of the
pyrolysis cleaning).
When the oven has cooled down, you can easily wipe away most residues with a damp
cloth. Depending on soiling levels in the oven, there may be visible deposits on the door
and below in the oven cavity. This is best removed using a non-abrasive sponge and a mild
solution of warm water and washing-up liquid. Only warm water and washing-up liquid is
normally enough to clean the sealing because this is only dust. Wipe the oven door and the
adjacent surfaces around the door seal. Do not rub the seal.
Cleaning function (Steam clean)
With Steam clean and a damp cloth, you can easily remove grease and dirt from the oven walls.
Using Steam clean
Only use Steam clean when the oven has cooled down fully. It is more difficult to remove
dirt and grease if the oven is hot.
The program takes 30 minutes. Food remains on the enamel walls will be sufficiently soaked
after 30 minutes so that they can be removed with a damp cloth.
1. Remove all accessories from the oven.
2. Pour 0.15 litres of water into the bottom of the oven.
3. Select ‘Steam clean’ with the function knob and selection knob.
4. Touch the confirm key to start Steam clean.
Do not open the door during the cleaning program.
MAINTENANCE
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ZX6611C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ZX6611C in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG ZX6611C

ATAG ZX6611C User Manual - German - 32 pages

ATAG ZX6611C User Manual - Dutch - 32 pages

ATAG ZX6611C User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info