692560
22
Zoom out
Zoom in
Previous page
1/32
Next page
EN 22
Cleaning the appliance
Clean the oven regularly to prevent fat and food particles from accumulating, especially
on the surfaces of the interior and the exterior, the door and the seal.
Activate the child lock (to prevent that the appliance is switched on accidentally).
Clean the exterior surfaces with a soft cloth and warm soapy water.
Next wipe with a clean, damp cloth and dry the surfaces.
Remove splashes and stains on the interior surfaces with a cloth and soapy water.
Next wipe with a clean, damp cloth and dry the surfaces.
Important!
Make sure that no water enters the vents. Never use abrasive cleaning materials
or chemical solvents. Always make sure that the seal of the door is clean.
This prevents accumulation of dirt and allows you to close the door properly.
Pyrolysis
Instead of cleaning manually, you can clean the oven space or an enamelled baking tray using
the ‘Pyrolysis’ oven feature. During pyrolysis the oven space is heated to a very high temperature.
Contaminants that are present incinerate at this high temperature and only ash remains.
With average use of the oven, we recommend running the pyrolysis function once per
month.
Caution!
First, remove all accessories and guide rails / telescopic guide rails from the oven
(see ‘Removing and cleaning the guide rails’).
Then remove any remaining food from the oven space and wipe the space with a damp
cloth. Chunks of food and fat may ignite during the pyrolysis process. Fire hazard!
Note! The oven space and an enamelled baking tray cannot be cleaned at the same
time using the pyrolysis function. If you want to clean an enamelled baking tray using
pyrolysis, then do this first (the oven space can become dirty due to the cleaning of the
baking tray). Insert one baking tray at a time. After that, the oven space can be cleaned.
Caution! Do NOT clean the glass baking tray using the ‘Pyrolysis’ ovenfeature.
Starting the Pyrolysis function
1. Make sure the oven space is completely empty and no chunks of food and fat are present!
2. If you want to clean an enamelled baking tray first, place the special pyrolysis guide rails in
position. Wipe the baking tray with a damp cloth and slide the baking tray into the oven on
Level 2.
MAINTENANCE
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ZX6611C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ZX6611C in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG ZX6611C

ATAG ZX6611C User Manual - German - 32 pages

ATAG ZX6611C User Manual - Dutch - 32 pages

ATAG ZX6611C User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info