490364
50
Zoom out
Zoom in
Previous page
1/58
Next page
GB 8
MAINTENANCE
Removing filter cassette
1 Switch off the flap and lighting.
2 Using the recess, press the filter backwards and tip it downwards
at the front.
3 Remove the filter from the hood.
Cleaning
You can clean the filters in the dishwasher. Allow them to drain fully
before reinstalling them in the hood.
The filters may also be cleaned by hand.
Clean the filters in water and washing-up liquid and rinse them. Allow
the filters to drain fully. The underside of the extractor hood can be
cleaned with a mild cleaning agent and a moist cloth. Then dry it off
with kitchen towel or a dry cloth.
Reinstalling filter cassette
The filter has to be installed with the locking mechanism to the side.
Open the locking mechanism. This pulls the projections to the side of
the filter inwards. When installing the filters hold the locking mechanism
in this position.
1 Push the projections at the side of the filter into the openings
provided for this purpose at the side of the extractor hood.
2 Hinge the filter upwards.
3 Release the locking mechanism. The projections at the side
of the filter move outwards into the openings provided for this
purpose at the side of the extractor hood.
The filter is now correctly positioned.
1
2
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG WV6211AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WV6211AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info