Manual ATAG WV6211AC (page 49 of 58) (English, German, Dutch, French)

490364

Zoom out

Zoom in

1/58

GB 7

Cleaning

Enamelled extractor hoods

Clean the extractor hood with soap and a soft cloth. Then rinse with

clean water. Do not use aggressive cleaning agents, such as soda. The

enamel will remain attractive if you polish it with wax from time to time.

Stainless steel extractor hoods

For cleaning the stainless steel parts you can best use a mild cleaning

agent (washing-up liquid) and a damp cloth. Dry with kitchen paper or

a dry cloth.

The stainless steel regains its shine if you occasionally use a stainless-

steel care product or polish. The polish applies a dirt-resistant layer to

the stainless steel. Always clean the stainless steel in the direction of

polishing.

ATAG supplies cleaning and maintenance agents for extractor

hoods. For information on availability, please contact the consumer

department (see warranty conditions for the phone numbers).

Never use abrasive cleaning agents (such as green scourers or other

scouring pads) or polishing cleaning agents (such as liquid abrasives).

Never use caustic agents. These can attack the stainless steel.

Grease filters

Clean the grease filters at least once a month. During cleaning, the

aluminium parts of the filters may become dull as a result of the

cleaning agents used, particularly when placed in the dishwasher. This

is normal and is not covered by the warranty.

MAINTENANCE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WV6211AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG WV6211AC Manual

Product: