Manual ATAG vwm 6 (page 11 of 27) (English, German, Dutch, Danish, French)

129926

Zoom out

Zoom in

1/27

1 6 1 7

m a i n t e n a n c e

cooker hood

f i l t e r s

Tilt the filters at the front upwards and

raise it a little. Remove it from the

extractor hood.

what to do

Clean the cooker hood two to four times

a year. Clean both the grease filter as

well as the rest of the appliance.

Use a liquid detergent to clean the

cooker hood.

You can clean the filters by soaking them

for a while in a soap solution. Remove the

filters by pressing gently and removing

from the holder.

what not to do

Never use abrasive cleaning agents, (such

as Vim, steel wool, green scouring pads

or other abrasive pads) or cleaning agents

(such as liquid scouring powder and Jif).

With stainless steel hoods in particular,

you risk damage to the structure so that

the result is a smudgy surface.

Never use aggressive chemical cleaning

agents. These may cause discolouration,

both on varnish and stainless steel.

Never put the filters in a dishwasher as

they will turn black. The discolouration of

the filters is not covered by the guarantee.

♦ Follow the instructions for cleaning the

filter and the appliance to meet the

requirements for optimal fire safety.

♦ If the appliance does not function as it

should, first check if you can deal with

the fault yourself. Often something

simple is the cause of the fault.

dealing with faults yourself

lighting does not/only half lights

cooker hood is noisy

c a u s e

defective light(s).

Outlet duct too long or with too many

b e n d s .

Defective motor.

r e m e d y

Unscrew the cross-head screw out of the

right-hand side of the cover plate.

Remove the plate by pulling to the right.

Unscrew the lamp from its fitting and

replace by a 40 W small screw thread

fitting bulb.

Change the outlet duct.

Call Service Department.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG vwm 6 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG vwm 6 Manual

Product: