71192
40
Zoom out
Zoom in
Previous page
1/48
Next page
40
Fitting the hinged door
1. Fit the two lateral bars A as shown in
the figure opposite. Align bars at the
top so that the upper hole lies over
the pre-mounted aligning disk.
With a width of 568 mm first fix the
additionally supplied aligning disks B
on the already pre-mounted aligning
disks.
2. Screw in the bars at the top only.
3. Stand the machine in front of the
kitchen unit into which it is to be in-
stalled. Place cable and hoses into the
neighbouring unit.
As you push the machine in, keep on
pulling the cable and hoses through
and ensure that they do not become
kinked.
4. Align the machine laterally in the
plinth area with the angle AN, tight-
en the screw V slightly.
5. Before installation of the hinge sup-
port: Screw bottom unit of the hinge
into the holes provided in the hinge
support.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG VA 5511 AT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA 5511 AT in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG VA 5511 AT

ATAG VA 5511 AT User Manual - German - 44 pages

ATAG VA 5511 AT User Manual - Dutch - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info