482639

ATAG TY6011M Manual

61
Zoom out
Zoom in
Previous page
1/70
Next page
INSTALLATION INSTRUCTIONS
“Front”
GB 18
Position the control box so that the cover of the box faces
upwards.
Screw the positioning plate (A) against the rear of the kitchen
front with the screws supplied. The holes for the control
knobs should be aligned. Use the light rings as fitting pins.
Now press the light rings (B) from the front through the
holes in the kitchen front and screw them tight with the
screws supplied.
Place the springs onto the pins (C) and push them from the
rear through the light rings in the kitchen front.
Place the conical springs on the control knobs (D).
3.
4.
5.
6.
7.
positioning plate (1x)
control knob (2x)
conical spring (2x)
rosette (2x)
light ring (2x)
screw (4x)
screw (4x)
pin (2x)
pin Z
hole Y
spring (2x)
nut M4 (2x)
control box
(A)
(B)
(D)
(C)
(E)
INSTALLATION INSTRUCTIONS
“Front”
GB 19
The teppan yaki comes with two sets of rosettes. For this
installation situation you need to use the following rosettes
so that the temperatures are easy to read. Attention: the
rosette with the
symbol belongs to the front zone, the
rosette with the
symbol belongs to the rear zone).
Press the rosettes from the front onto the pins.
Press the control knobs onto the pins.
Lead the control box and the mains plug through the cut-
out in the worktop.
Position the control box (E) against the positioning plate so
that pin Y falls into hole Z.
Use the nuts that were supplied with the product to secure
the control box to the positioning plate.
Turn the teppan yaki over and place it in the cut-out.
Place the dripping pan into the teppan yaki.
Connect the appliance to the mains. The hob is now ready
for use.
Check if the appliance works properly.
Give the user manual to your client or, if you own the
teppan yaki, store the manual in a safe place.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
5050
Kitchen front
F R
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG TY6011M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG TY6011M in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info