482639
59
Zoom out
Zoom in
Previous page
1/70
Next page
GB 14
GB 15
INSTALLATION INSTRUCTIONS
Important matters
Important matters
Do not use the teppan yaki if it is damaged.
Never open the casing of the teppan yaki. This may only be
done by a qualified installer.
Ensure that the flexes of electrical appliances, e.g. a mixer, do
not touch the hot grill zone.
Always disconnect the appliance from the electronic power
supply before any repair work is carried out. You do this by
unplugging the appliance, by switching off the fuse(s) or, if
you have a permanent connection, by setting the switch on
the power supply lead to zero.
Do not use a teppan yaki that is broken or contains cracks.
Switch off the appliance immediately, unplug it from the
power supply to avoid any electrical shocks and call the
service department.
The connection must comply with all national and local
regulations.
The appliance must always be earthed.
The connection cable should hang unobstructed and not run
the risk of being hit by a drawer.
Ensure that the teppan yaki is built into a flat worktop.
The walls and the worktop surrounding the appliance should
be heat-resistant to at least 85 °C.
The warranty does not cover any damage resulting from a
wrong connection, faulty assembly or improper use.
The cables connecting the teppan yaki to the control box
should not be bent, twisted or pressed down by an object.
Ensure that this does not happen when unpacking and
installing the teppan yaki.
Installation situations
Dependent on the installation situation, there are several
instructions for installing the teppan yaki into a worktop. Which
instructions to use depends on the position of the control
knobs ("front" or "top") and the worktop material selected
("wood" or "stone"). Also special sawing measurements apply
when integrating a teppan yaki with the ATAG Magna Puzzelo
appliances HI
3171M, HG3111M and WO3111M.
"Front" or "top"
With "front" mounting, the control knobs are fitted into the
kitchen front. With "top" mounting the control knobs are fitted
into the worktop.
"Wood" or "stone"
"Wood" stands for all woodlike worktops that can be drilled
into, e.g. wood, plywood and chipboard. "Stone" represents all
stony worktops that are non-drillable, like marble or granite.
Use the table below to select the correct instruction for building
in the appliance. Please select the desired installation situation
and adhere to the corresponding order for building in the
appliance.
Installation situation table Worktop material
Wood Stone
Knob location Knobs inside the
kitchen front
“Front”
Knobs inside the
worktop
Top-wood Top-stone
Installation next to a Magna Puzzelo appliance Puzzelo
Attention: The control knobs cannot be mounted on the rear
wall.
INSTALLATION INSTRUCTIONS
Installation situations
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG TY6011M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG TY6011M in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info