336557

ATAG ty 3011 m Manual

60
Zoom out
Zoom in
Previous page
1/70
Next page
Before you start
Read the relevant installation instruction carefully to see if the
conditions for building in the appliance have been met.
Installation instruction “Front”
Attention: the following instruction applies only to an
installation situation whereby the control knobs are in the
kitchen front, in combination with a "wooden" or "stone"
worktop. See the "Installation situation table" on page 15.
Built-in dimensions
Create the cut-out for the teppan yaki.
The control box can be mounted on kitchen fronts with a
maximum thickness of 40 mm. Create the cut-outs for the
control knobs in the kitchen front. Use the drawing template
on page
34.
1.
2.
INSTALLATION INSTRUCTIONS
“Front”
GB 16
522
490
56
330
300
min. 50
522
490
56
592
560
min. 50
135 mm
min. 25 mm min. 25 mm
X
X = measurement from
bottom worktop
ø 30(2x)
135
77
232
141
cover
box for building in
mounting plate
If worktop has thickness of: x becomes:
< 56 mm x = 51 mm
> 56 mm
x = 51 mm + (56 - worktop thickness)
Wooden worktops
If necessary, treat the sawn ends of wooden worktops with
sealing varnish, to prevent swelling of the worktop by moisture.
Order in which to build in the appliance
Turn the appliance upside down and place it on the
worktop. Remove the protective foil from the sealing tape
and apply the tape around the cut-out in the worktop. Start
at the rear side of the appliance and tape the sealing strip
along the corners. Make sure that the ends of the sealing
strip fit tightly together.
Measure the thickness of the kitchen front. Set the control
box to this thickness by correctly positioning the three
screws on the bottom of the control box. The measurements
on the sticker correspond with the thickness of the kitchen
front.
1.
2.
INSTALLATION INSTRUCTIONS
“Front”
GB 17
10 mm
16 mm
20 mm
32 mm
40 mm
10 mm
16 mm
20 mm
32 mm
40 mm
10 mm
16 mm
20 mm
32 mm
40 mm
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ty 3011 m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ty 3011 m in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info