692553

ATAG OX9511HN Manual

70
Zoom out
Zoom in
Previous page
1/76
Next page
EN 16
• Use the reverse order to assemble the door. Insert the door at an
angle of 15° in the hinges on the front of the appliance and push
the door forwards and downwards so that the hinges slide into their
notches. Check to be sure the hinge notches are properly in place.
• Then open the door fully and turn the pawls back to their initial
position. Close the door slowly and check that it closes properly.
If the door does not open or close properly, make sure the hinge
notches are positioned correctly in the hinge holders.
Removing the oven windows
The oven windows can be removed from the oven door to clean them
better.
• Push in the small pawls at the top left and right (1).
• Remove the top edge from the oven door.
• Remove the oven windows
Replacing the oven light bulb
Please note!
Disconnect the appliance from the mains by removing the plug from the
socket before the changing the light.
• Remove the glass light cover by carefully clicking it loose with a
screwdriver.
• Replace the oven light bulb.
• Put the glass cover back on. Make sure it catches properly in the
holder.
Install a light bulb suitable for 300º C temperatures.
CLEANING
1
1
… 70 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG OX9511HN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG OX9511HN in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info