692553

ATAG OX9511HN Manual

69
Zoom out
Zoom in
Previous page
1/76
Next page
EN 15
4. You will hear 2 beeps once the cleaning programme is finished.
5. Turn the oven function knob to the o position.
6. Remove grease, grime and any water left behind with a damp cloth.
• Please note: Do not open the oven door until the cleaning
programme is completely finished. The cooling phase is required for
a proper cleaning function.
• Only use the cleaning function on low temperatures.
• Residues can be removed easily with a damp cloth after the
cleaning programme is finished.
• The cooling time may vary depending on the ambient temperature.
• After the cleaning programme is finished, always first check
whether the oven has cooled enough before starting to clean.
Cleaning a baking tray using the cleaning function
If the baking tray is seriously grimy, it can also be cleaned using the
cleaning function.
1. Place the baking tray to be cleaned in the middle of the oven.
2. Pour 300 ml of water in the baking tray.
3. Turn the oven function knob to the cleaning function.
You will hear 3 beeps and the cleaning programme will begin.
Please note: Use dishwashing detergent if the oven is seriously grimy.
You can also add a few drops of dishwashing detergent to the water
(when using the cleaning programme).
Some food products can discolour the enamel (tomatoes, vinegar, very
salty roasted dishes, etc.). This is normal and cannot be prevented!
Removing the oven door
To clean the inside of the oven better you can remove the oven door.
• Open the oven door fully and turn the pawls (N) back as far as they
will go.
• Then close the door slowly so the pawls end up in the holder.
At approximately 15° (relative to the closed door position) lift the
door slightly upwards and lift it out of the two hinge holders.
CLEANING
N
… 69 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG OX9511HN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG OX9511HN in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info