Manual ATAG MC 4111E (page 93 of 114) (English, German, Dutch, French)

480241

Zoom out

Zoom in

1/114

3 Before use

3.1 Before you begin

• Open the door and remove the packaging material. Do not install the microwave

oven when it is damaged, but contact the manufacturer.

• Remove the protection foil from the outside of the microwave oven.

• Clean the inside of the oven and the accessories with a damp cloth. Do not use

abrasive cleaners or any strongly smelling detergents.

• Place the turntable in the middle of the microwave oven with the indentation for the

driving mechanism downwards.

• Connect the combi microwave oven to the mains supply.

3.2 Setting the clock

When the power is ﬁ rst supplied to the microwave oven, you

must set the clock. In the display ‘00:00’ will blink. The clock

will work as long as the microwave oven is connected to the

mains.

1. Turn the selection button to set the right time (between

00:00 and 23:59).

2. After you have set the right time, you will hear a beep and

the time stops blinking.

The clock has been set.

Notes

• If you want to change the time later on, you have to press and hold the clock button.

The actual time disappears and then the time will blink in the display. Turn the

selection button to set the new time. Press the clock button again to conﬁ rm the

setting or wait for the time to stop blinking in the display.

• If you do not want to see the clock in the display, press the clock button brieﬂ y. The

time disappears. Press the clock button again, and the clock appears in the display

again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG MC 4111E in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG MC 4111E Manual

Product: