772582

ATAG KD84178CDC Manual

60
Zoom out
Zoom in
Previous page
1/128
Next page
EN 28
FAULTS
Problem Cause/Solution
Some or all of the
LED lighting does
not work.
Consult a service technician about LED lighting that is not working. You
may not try to repair LED lighting.
Appliance makes a
noise.
• The appliance is cooled by a refrigeration system with a compressor
(and with some models, also a fan) that makes a noise. The noise level
depends on the installation of the appliance, its correct use and its
age.
• When you connect the appliance to the power supply the noise made
by the compressor or flowing refrigerant may be slightly louder. This is
not indicative of a defect, and has no effect on the service life of the
appliance. The appliance will make less noise after a while.
• The appliance may be temporarily noisier after the door has been
opened for too long or too frequently, a large quantity of fresh food has
been put in the appliance or the intensive freezing function has been
activated.
‘LL’ code shown in
the display.
Child lock has been activated. See the chapter ‘Child Lock’.
‘PF’ code shown in
the display.
Lengthy power failure. See the chapter ‘Power failure alarm’.
Error code E0
shown in the
display.
The touch keys do not respond. Call the service centre to make an
appointment for repair work. The appliance operates in the safe mode
until it has been repaired. The appliance automatically retains the most
suitable temperature for each compartment.
Error code E1, E2
or E3 shown in the
display.
A temperature sensor is defective. Call the service centre to make an
appointment for repair work. The appliance operates in the safe mode
until it has been repaired. The appliance automatically retains the most
suitable temperature for each compartment.
Error code E9
shown in the
display.
• A door has been open for too long: close the door.
• If the lighting in the compartment has also stopped working then
the door sensor is defective. Call the service centre to make an
appointment for repair work. The appliance operates in the safe mode
until it has been repaired. The appliance automatically retains the most
suitable temperature for each compartment.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KD84178CDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD84178CDC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info