772582
59
Zoom out
Zoom in
Previous page
1/128
Next page
EN 27
Faults table
When you have any doubts about whether your appliance is working properly you should not
immediately assume that it is defective. We recommend that you should in any case check the
points in the following table.
Problem Cause/Solution
Appliance is
connected to the
power supply but
is not working.
Check that the socket is live and that the appliance is switched on.
Appliance cools
continuously for a
long time.
The compressor is operating for a longer time at low capacity (low
energy consumption / high efficiency). This is the most efficient form
of operation. The following factors can also influence the appliance's
operation:
The ambient temperature is too high.
The door has been opened for too long or too frequently.
The door is not closed properly.
The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
Too much fresh food has been put in at the same time.
Insufficient air circulation around the compressor and condenser.
Check that the ventilation around the appliance is sufficient (see the
separate installation instructions).
Excessive ice
formation in the
freezer.
The door has been opened for too long or too frequently.
The door is not closed properly.
The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
Alarm key and/or
temperature
display flashing.
The door has been opened for too long or too frequently.
The door does not seal properly (the seal is dirty, the door is
misaligned or the seal is damaged, etc.).
Too much fresh food has been put in at the same time.
Door does not
open easily.
You are trying to open the appliance's door just after you have closed
the door. Then opening the door is difficult. When you open the door,
cold air escapes from the appliance and is replaced by warm air from the
surroundings. As this air cools a slight vacuum is created that makes it
more difficult to open the door. The situation returns to normal after a few
minutes, and the door opens easily again.
FAULTS
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KD84178CDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD84178CDC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info