481266

ATAG KD7..G Manual

34
Zoom out
Zoom in
Previous page
1/70
Next page
removal of decorative trim strip from
door handle
1. Open the door of the freezer section and
remove the screw in the protective cover of
the door handle.
N.B. Try not to remove the protective cover.
2. Loosen the screws along the top decorative
trim strip by about 6 mm.
3. Remove the five screws on the side of the
door handle (see accompanying illustration).
You will find extra screws for the decorative
trim strip in the vegetable and fruit drawers.
4. Carefully remove the door handle and the
top protective cover.
N.B.
Make sure that the bottom protective cover is
not damaged when you remove the door handle.
It is attached to the handle by means of a screw
and needn't be removed.
fitting door claddings
Carefully slide the cladding panels between the
door and the decorative trim strips.
When fitting the top panel in the freezer section
door, make sure that the sawn-out corner is in
the top left position.
door claddings (continued)
protective cover
over handle
Models with decorative trim strips may be fitted
with door claddings.
The sizes of the cladding panels to be sawn out
are as follows:
top of freezer section 364 mm x 476 mm
bottom of freezer section 364 mm x 822 mm
refrigerator section 510 mm x 1656 mm
Panels which are 6 mm thick fit between
decorative trim strips and the door. In the case
of thinner panels, you should insert filling
material between the door and the panel.
Your dealer can supply you with ready-made
stainless steel panels.
door claddings
corner cutout
(see below)
corner cutout
(see below)
cutout of upper corners
3 mm
8 mm
364 mm
476 mm
364 mm
510 mm
822 mm
1656 mm
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KD7..G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD7..G in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info