556890
84
Zoom out
Zoom in
Previous page
1/89
Next page
GB 40
INSTALLATION
Electrical connection
Common connections:
3 phases with 1 zero connection (3 1N, 400 V ~ / 50 Hz):
The voltage between the phases and the zero is 230V ~. The
voltage between the phases is 400 V ~. Fit a connecting bridge
between connecting points 4-5. Phase 3 carries no load. Your
groups must have fuses of at least
16 A (3x). The connection cable must have a core diameter of at
least 2.5 mm ².
2 phase and 2 zero connection (2 2N, 230 V ~ / 50 Hz):
The voltage between the phases and the zeros is 230V ~. Your
group must have fuses of at least 16 A (2x). The connection
cable must have a core diameter of at least 2.5 mm².
Special connections:
Single phase connection (1 1N, 230 V ~ / 50 Hz):
The voltage between the phase and the zero is 230V ~. Fit
connecting bridges between connecting points 1-2 and 4-5.
Your group must have a fuse of at least 32 A. The core diameter
of the connecting cable should be at least 6 mm².
Connection for hobs with 5 cooking zones:
3 phases with 1 zero connection (3 1N, 400 V ~ / 50 Hz):
The voltage between the phases and the zero is 230V ~. The
voltage between the phases is 400 V ~. Fit a connecting bridge
between connecting points 4-5.
The groups must have fuses of at least 16 A (3x).
The connection cable must have a core diameter of at least
2,5 mm².
The bridges on the connecting block can be used to create the required
connections, as indicated in these illustrations.
Fix the cable with a pull relief and close the cover.
Connecting point, wall power point and plug must be accessible at all
times.
right zones
left zones
device
inside
right zones
left zones
device
inside
right zones
left zones
device
inside
appliance
interior
right-hand zones
middle zones
left-hand zones
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI9271SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI9271SI in the language / languages: English, Dutch as an attachment in your email.

The manual is 7,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HI9271SI

ATAG HI9271SI Installation Guide - English, German - 2 pages

ATAG HI9271SI User Manual - German - 89 pages

ATAG HI9271SI Installation Guide - Dutch, Danish, French - 2 pages

ATAG HI9271SI User Manual - French - 89 pages

ATAG HI9271SI Installation Guide - Swedish, Norwegian - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info