556890
83
Zoom out
Zoom in
Previous page
1/89
Next page
GB 39
Ventilation
The electronics in the appliance need cooling. The appliance will
automatically switch off if there is insufficient air circulation. There
are ventilation openings on the underside of the appliance. It must be
possible for cool air to be drawn in through these openings. Air vents
are located at the front of the appliance.
Constructing above a load or an oven or fixed pannel
Ventilation occurs through the plinth (A) and the back of the cupboard
(B). Saw out the ventilation openings (min. 100 cm
2
). Air supply A is not
necessary if there is another opening that can supply air together with
opening B.
Make sure the crossbar does not impede the airflow. Plane or saw the
crossbar C diagonally if necessary.
It is important to ensure adequate ventilation (intake and outlet).
Create a ventilation opening at the front of the kitchen unit.
The opening must be at least as wide as the appliance itself and
must be at least 3 mm high, if the appliance is being installed above
a drawer or a shelf. Ensure a clearance of at least 20 mm between
the hob and drawer or shelf ‘D’.
If creating a ventilation opening is impossible, ensure that there is a
gap of at least 60 mm between the hob and the drawer or shelf.
A
C
B
INSTALLATION
20 mm
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI9271SI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI9271SI in the language / languages: English, Dutch as an attachment in your email.

The manual is 7,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HI9271SI

ATAG HI9271SI Installation Guide - English, German - 2 pages

ATAG HI9271SI User Manual - German - 89 pages

ATAG HI9271SI Installation Guide - Dutch, Danish, French - 2 pages

ATAG HI9271SI User Manual - French - 89 pages

ATAG HI9271SI Installation Guide - Swedish, Norwegian - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info