331535
63
Zoom out
Zoom in
Previous page
1/73
Next page
operation
switching on
memory function
The appliance is fitted with a memory function. This function
enables the cooking settings and associated cooking times to
be programmed for each cooking zone individually.
switching on memory function (play)
1
Press the 'memory' button briefly. The light next to
'PLAY' comes on.
The lights next to 'REAR' and 'FRONT' start to flash.
2 Switch on a cooking zone.
The cooking zone goes to the cooking setting that has
been programmed. If there is no programme present, the
zone immediately switches off again.
Switch the zone off with the on/off switch or the 'memory'
button .
If, during the running of a programme, a high power level is
selected at the same as another zone is set manually to a
high power level, the other zone will switch to a lower power
level. The settings of the programme, therefore, are
dominant. If the programme sets the zone at a lower power
level, the other zone will not switch back to the high power
level.
GB 15
memory
By pressing the button a certain number of times, you
always get the following series of reactions:
If a cooking zone has not been switched on, it cannot be
selected in order to be switched off by the cooking timer and
it is skipped in the table above.
If both left (or right) cooking zones have been switched on,
the front or the rear cooking zone can be selected by
pressing the button again.
At the end of the cooking time, you hear a beep.
The zone switches off.
Switch the beep off at the end of the cooking time by
pressing the cooking timer button .
If you do not switch the beep off, it will stop automatically
after 30 minutes.
childproof lock
The appliance is fitted with a childproof lock. If the childproof
lock is switched on, the controls cannot be used.
The childproof lock can only be switched on if none of the
zones or cooking timers have been activated.
locking
Press the button with the key symbol.
The light next to the key symbol comes on.
unlocking
Press the button with the key symbol and keep it pressed for
3 seconds. The light next to the key symbol goes out.
Number of times is pressed Reaction
0 Clock is switched off; displays are dark
1 Clock as cooking timer
2 Clock switches the rear zone off after the
selected time (if the zone has been switched on)
3 Clock switches the front zone off after the
selected time (if the zone has been switched on)
4 Clock is switched off; displays are dark
and so on
GB 14
operation
switching on
childproof lock
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG hi7071a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG hi7071a in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info