336583
25
Zoom out
Zoom in
Previous page
1/35
Next page
GB 14 GB 15
Settings
Switching on and power setting
e cooking zones have 9 levels. In addition, there is a ‘boost’ setting,
which can be recognized by a ‘P’ on the display (see page 15; ‘Boost’).
Place a pan on a cooking zone.1.
2. Press the on-/off button
of the hob.
A single beep will be heard and on the display of each cooking zone
‘0.’ will appear.  e red light to the top right of the on-/off button
is
constantly on. If you do not undertake any further action, the cooking
zone will automatically switch off after 10 seconds.
3. With the
or button, set the desired cooking zone in the
desired setting.  e hob automatically starts in the set setting
(if a pan is detected).
If you press the º
button for the fi rst time, setting ‘4’ will appear.
If you press the º
button for the fi rst time, setting ‘9’ will appear.
Tip
You can press and hold the
or button to set the desired power
more quickly.
Pan detection
If the hob doesnt detect a(n) (iron-containing) pan after a cooking
power has been set, on the display both the pan detection symbol
and the set power will both keep on fl ashing and the cooking zone
will remain cold. When no (iron-containing) pan is placed within one
minute, the cooking zone will switch off automatically (also refer to
pages 12 and 13; “Pans”).
Residual heat indicator
If a cooking zone has been used intensively it will retain heat for
several minutes afterwards. As long as the cooking zone is still hot an
“H” will be visible in the display.
OPERATION Settings
Boost
You can use the ‘boost’ function to cook with the highest possible
power during a short period of time (maximum of 10 minutes).
After the maximum boost time the power will be reduced to setting 9.
Switching on the boost function
e hob is switched on and theres a pan on a cooking zone.
1. Press
. ( is is also possible if a power has already been set).
2. Press the
or button of the desired cooking zone.
‘P. will appear on the display.  e boost function will be activated
immediately.
In case the
or button isnt pressed, the red light to the right top
will fl ash for 3 seconds and then go out. A single beep will be
heard.
Switching off the boost function
e boost function is switched on,
‘P’ is visible on the display.
1. Press the
button.
Power setting 9 will appear on the display , the boost function is
switched off .
Or:
2. Simultaneously press the
or button.
Setting ‘0.’ will appear on the display, the cooking zone is switched off .
Two cooking zones one in front of the other
Two cooking zones one in front of the other eff ect each other.
When both of these cooking zones are switched on at the same time,
the power is automatically shared between them. Up to setting 9
this has no consequences. However, when you set a cooking zone to
the boost setting, the other cooking zone will be set to a somewhat
lower setting.
If a cooking zone is set at boost and you want to set the other one
to setting 9, the cooking zone with boost will automatically go to
a lower setting.
Two cooking zones alongside each other have no eff ect on each other.
You can set both cooking zones on a high setting.
OPERATION
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG hi 6271 t at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG hi 6271 t in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG hi 6271 t

ATAG hi 6271 t Installation Guide - English, German - 2 pages

ATAG hi 6271 t User Manual - German - 62 pages

ATAG hi 6271 t Installation Guide - Dutch, Danish, French - 2 pages

ATAG hi 6271 t User Manual - French - 62 pages

ATAG hi 6271 t Installation Guide - Swedish, Norwegian - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info