507741
21
Zoom out
Zoom in
Previous page
1/64
Next page
21
English
PROBLEM ERROR CAUSE ACTION
Water softener delivers hard
water
a. Bypass valve in Bypass position
b. Meter connection disconnected
c. Restricted/stalled meter turbine
d. Defective meter
e. Defective PC board
f. Set-up error
a. Put bypass valve in position service
b. Connect meter to PC Board
c. Remove meter and check for rota-
tion or foreign matter
d. Replace meter
e. Replace PC Board
f. Check control valve set up procedure
Time of day flashes on and
off
a. Battery back up maintains time of
day up to 2 years in event of power
outage and battery is depleted.
Time of day flashes when battery is
depleted
a. Reset time of day and replace
battery on PC Board (Lithium coin
type Battery 2032)
Softener delivers hard water a. Bypass valve is open or defective
b. No salt or low salt level in brine tank
c. Softener fails to draw brine
d. Excessive water usage
e. Insufficient brine level in brine tank
f. Meter faulty
g. Raw water hardness fluctuation
a. Close bypass valve or replace
b. Add salt to brine tank and maintain
salt level above water level c. See
problem “Softener fails to draw
brine”
d. Check capacity settings
e. Check brine refill setting and refill
flow restrictor for blockage
f. Test meter and clean or replace
meter
g. Test raw water hardness and adjust
settings to highest known hardness
Unit uses too much salt a. Improper brine refill setting
b. Improper settings
c. Excessive water usage
d. Leaking faucets, toilets, …
a. Check brine refill setting for proper
salt dosage
b. Check water hardness and reeva-
luate capacity setting specification
c. See problem “Excessive water in
brine tank”
d. Repair or replace those items
Softener delivers salt water a. Low water pressure
b. Excessive water in brine tank
c. Wrong size injector
a. Check incoming water pressure –
Mini 1.8 bars
b. See problem “Excessive water in
brine tank”
c. Install correct injector
Excessive water in brine tank a. Injector is plugged
b. Faulty piston/seal assembly
c. Plugged or kinked drain line
d. Backwash flow controller closed off
e. Defective brine line flow control
a. Remove injector and clean ports
b. Replace piston/seal assembly
c. Correct any kinking or plugging of
drain line
d. Check backwash flow controller
e. Remplace brine line flow controller
Atag Descale handl EN FR NE.indd 21 13/06/12 16:12
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG Descale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG Descale in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG Descale

ATAG Descale User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info