507741
19
Zoom out
Zoom in
Previous page
1/64
Next page
19
English
Number of used M
3
since start up
Push on to go to the next parameter
Records of last 10 potential errors generated by the
controller.
Push on to go to the normal mode
6. Softener operation
Meter Regeneration
In normal use, the LCD display alternates between time of day, remaining capacity (m3),
flow rate, number of days until next regeneration and the installer or softener name.
At the time of regeneration, controller compares remaining capacity with reserve and
decides wether to start or not start a regeneration. Softener can have as an option of a
blending device to insure a residual hardness in softened water.
Controller during regeneration
During regeneration, the LCD display shows the cycle number, its name and the
remaining time for this cycle. When all the cycles are done, the valve comes back in to
service position. The controller can handle co-current regeneration (brining in the same
way as flow), counter current (upflow brining), with wet (fill after rinse) or dry brine tank
(prefill) and normal or proportional brining.
Valve operation during programming
To enter program mode the valve has to be in service. While in the program mode, the
valve will continue to operate normally monitoring all information. The programming is
stored in permanent memory.
Valve operation during a power failure
During a power failure all control displays and programming will be stored for use when
power is resumed. The control will retain these values for years, if necessary without loss.
The control will be inoperative and any calls for regeneration will be delayed. The control
will, upon power resumption operate normally from the point where it was interrupted.
TOTAL CUBIC METERS
50,0
ERROR LOG
403
Atag Descale handl EN FR NE.indd 19 13/06/12 16:12
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG Descale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG Descale in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG Descale

ATAG Descale User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info