507741
8
Zoom out
Zoom in
Previous page
1/64
Next page
8
English
8) Push the REGEN button and hold it down for 3 seconds. The system will advance to the “first”
position. When the motor stops, push the REGEN button repeatedly until “RINSE” shows in
the left upper hand corner of display. Slowly turn the bypass to close the outlet and open the
system inlet. Run water to the drain until it runs clear. Place your ATAG Descale softener in the
by-pass position (System Inlet-Outlet closed – Full bypass). Push the REGEN button until unit
is back in to softening mode.
9) Once again, push the REGEN button and hold it down for 3 seconds. When the motor stops,
push the REGEN button repeatedly until “BACKWASH” appears. Slowly open the inlet bypass
valve
1
/
2
way to feed the softener with water. Allow water to slowly fill the tank. When a solid
stream of water starts coming out of the drain line, open the by-pass inlet valve all the way
and allow to run out the drain until water clears. Then slowly place the by-pass into “Normal
position” mode (System inlet-outlet open) by opening the outlet side of bypass valve.
10) Press the REGEN button until LCD display says “REGENERANT DRAW DN” or “REGENERANT
DRAW UP”. Carefully check water level in the brine tank. If it decreases, got to the next step
otherwise see section “TROUBLESHOOTING”
BACKWASH
“04:00”MIN
DRAW TIME
“30:00”MIN
RINSE
“02:00”MIN
Atag Descale handl EN FR NE.indd 8 13/06/12 16:12
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG Descale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG Descale in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG Descale

ATAG Descale User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info