772244

ATAG CU1050SMR Manual

37
Zoom out
Zoom in
Previous page
1/44
Next page
EN 7
▷At lowest dimmer setting the light will go back from dimmed light
to brighter light.
If you have used the dimmer function and then switch off the lighting,
the last dimming setting will be used when the lighting is switched on
again.
Setting the lighting color
1. Switch On the light.
2. Press and hold the ‘Off / clean air button’.
▷The lightcolor will switch to the ‘coldest’ setting and will become
‘warmer’ the longer you depress the switch.
▷At the ‘warmest’ setting the light color will go back to a ‘colder’
light color.
▷The selected light color will remain in the built in units memory.
Switching On the timer
1. Choose the fan setting desired and press the timer button.
▷The extractor remains at the selected setting for 10 minutes,
after which the extractor is automatically switched Off.
▷Timer indication appears on the led status bar.
Clean air function
1. Switch Off the built in unit and lighting.
2. Select within 5 seconds the desired speed for the clean air function
by pressing the ’+’ or ‘-’ buttons and press the clean air button to
confirm.
▷The Clean air function is activated.
▷The clean air indication appears on the led status bar.
▷The built in unit will be switched on for 10 minutes every hour at
the selected level.
3. Select if desired a different speed setting.
4. Switch Off the clean air function by pressing the ’+’ or ‘-’ buttons.
Filter saturation signal
• Filter saturation indication appears on the led status bar:
▷Clean the metal grease filters
• Six consecutive audible signals:
▷Replace the carbon filters.
Resetting the saturation signal
USE
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG CU1050SMR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG CU1050SMR in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info