772244

ATAG CU1050SMR Manual

36
Zoom out
Zoom in
Previous page
1/44
Next page
EN 6
USE
Remote control
Connecting the remote control to the built in unit
If the built in unit cannot be operated with the remote control, e.g. after
the battery has been changed, the connection between the remote
control and the built in unit must be re established.
1. Press and hold the ‘+’ button.
2. Attach the built in unit to the mains voltage.
▷A long audible signal sounds. The remote control has been
connected to the appliance.
Note: If no audible signal sounds within 30 seconds, repeat this
procedure.
Controls
Switching on the fan
1. Press the ‘+’ button.
▷The extractor starts at setting 2.
▷Setting 2 appears on the led status bar.
Adjusting the extractor capacity
1. Press the ‘-’ or ‘+’ button to select a higher or lower setting.
▷The selected setting appears on the led status bar.
▷The maximum setting you can select is the intensive setting 4.
The run time of the intensive setting is 4 minutes. Once this time
has elapsed, the fan switches back to level 2.
Switching Off the fan
1. Press the ‘-’ button until the built in unit switches Off or press the
Off /Clean air button.
Switching lighting on and off
1. Press the light button.
▷The lighting switches on.
2. Press the light button again and the lighting switches off.
Dimming the lighting
1. To dim the lighting, press and hold the light button until the dimmer
function is activated.
▷The lighting comes on at maximum intensity and it decreases as
long as you hold down the button.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG CU1050SMR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG CU1050SMR in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info