111331
141
Zoom out
Zoom in
Previous page
1/180
Next page
YOUR COFFEE MACHINE
9 Installation instructions
GB 35
9.1 Important matters
After removing the packaging, make sure the product is complete
and undamaged. If in doubt, do not use the appliance and contact
a quali ed professional.
Installation must be carried out by a quali ed techncian and in
compliance with current regulations.
Packing elements (plastic bags, polystyrene etc.) must not be left
within reach of children as they may represent a hazard.
Never install the appliance in environments where the
temperature may reach 0 °C or lower (the appliance may be
damaged if the water freezes).
Make sure the mains voltage corresponds to the voltage indicated
on the appliance rating plate. Connect the appliance to an
e ciently earthed socket with a minimum current rating of 10A
only.  e manufacturer may not be considered liable for possible
incidents caused by the failure to adequately earth the mains.
•  e power socket has to remain visible after installation.
Do not use multiple plug adapters or extension leads.
•  e power cable on this appliance must not be replaced by the
user as this operation requires the use of special tools. If the cable
is damaged or requires replacing, contact an authorised service
centre only to avoid all risks.
For the electrical connection use a HO5 VV-F type cable as
indicated in the table below:
Conductors Amount x size
230 V ~+ ~ 3 x 1.0 mm
2
You should personalise water hardness as soon as possible
following the instructions in 6.2.2 on page 24 and 25.
141


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG CM 4111 AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG CM 4111 AC in the language / languages: Dutch as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info