121882

ATAG Cafemax Manual

65
Zoom out
Zoom in
Previous page
1/93
Next page
5.2.11 Cleaning the nozzles
Every time after heating milk or making cappuccino, the nozzles on
the milk container have to be cleaned as follows, otherwise remains of
milk can set hard.
Place a container under the milk dispenser pipe and press on the 1.
CLEAN button on the milk container for at least 5 seconds
(fi g. 21).  e display shows CLEANING!
Warning! Risk of scalding from steam and hot water escaping
from the milk dispenser pipe.
Now remove the milk container and clean the nozzles on the 2.
appliance with a damp cloth (fi g. 22).
Put the hot water nozzle back in (fi g. 23).3.
When you have fi nished cleaning, take the milk container off and
place it in the fridge.  e milk should not stay out of the fridge
for longer than 15 minutes. See 6.1.3 on page 23 for information
on cleaning the milk container.
YOUR COFFEE MACHINE
5 Use
GB 19
CLEAN
21
22
23
YOUR COFFEE MACHINE
5 Use
GB 18
In the next two paragraphs you will fi nd the steps for preparing
cappuccino and subsequently frothing and heating milk.
5.2.9 Making cappuccino
First follow the steps described in 5.2.8 on page 16 and 17!1.
Swing the milk dispenser pipe out and place a suffi ciently big cup 2.
underneath the coff ee dispenser and the milk dispenser pipe
(fi g. 20).
Select the desired coff ee strength for the cappuccino with the 3.
“coff ee strength” knob (see 5.2.1 on page 10).  e cup size
on the top line (e.g. ESPRESSO CUP) has no meaning here,
as the amount of coff ee made is fi xed in the CAPPUCCINO
PROGRAM menu.
Press once on the “cappuccino” button 4.
. Hot and frothy milk,
then coff ee, are dispensed into the cup.  e top line of the display
shows CAPPUCCINO and on the bottom line a progress bar
and percentage are displayed, which shows the progress of the
cappuccino being made.
e amount of milk and coff ee is preset to normal quantities.
You can change and save these to suit your taste, see 5.2.12 on
page 20. After a few seconds the appliance is ready for use again.
e display shows the last selected coff ee setting.
5.2.10 Frothing/heating up milk
First follow the steps described in 5.2.8 on page 16 and 17!1.
Swing the milk dispenser pipe out and place a suffi ciently big cup 2.
underneath the coff ee dispenser and the milk dispenser pipe
(fi g. 20).
Press twice on the “cappuccino” 3.
button (within 2 seconds of
each other). Hot and frothy milk is dispensed into the cup.  e
top line of the display shows MILK FROTHING and on the
bottom line a progress bar and percentage are displayed, which
shows the progress of the milk frothing process.
e amount of milk is preset to normal quantities. You can change
and save these to suit your taste, see 5.2.12 on page 20. After a
few seconds the appliance is ready for use again.  e display shows
the last selected coff ee setting.
CLEAN
20
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG Cafemax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG Cafemax in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info