424615
11
Zoom out
Zoom in
Previous page
1/37
Next page
Press 5 to move the window and select the type of LNB (Universal 1, Universal 2,...), using the CH+
and CH- buttons. Press OK.
Go to the motor settings menu, select SATELLITE ACTIVATION to commence activating the satellites
you wish to include in your search.
Here you specify which satellites will be accessible in the automatic search mode.
Scan through the satellite list (use keys 5 and 6), then activate or deactivate the satellites by pressing
OK. Then press 3.
The number of satellites selected in indicated bottom left.
Select DISH ALIGNMENT (USE KEYS 5 AND 6, then press OK to enter). The dish alignment screen
will be displayed.
Then press OK again.
Using 3 and 4, choose the satellite towards which you wish to point your dish
Select your type of pointing (analogue or digital)
If you use a Wide Band LNB, set the horizontal and
vertical SKEW.
Check that the pointing parameters (frequency, symbol rate and polarisation) are correct.
It is necessary to tune SKEW for both horizontal and vertical polarisation for each satellite to be installed.
If you use an ASTON Tracsat DH12 or DH23 model, select automatic tracking, then press OK. If this
search is unsuccessful, use the semi-automatic mode.
In order to have a clear understanding of the DiSEqC norm, you will need to consult the user notice of your motor.
Before using your motor, ensure that it has been installed and configured by a qualified installer.
If you do not have an ASTON motor, select the semi-automatic mode, then press OK. Once the motor
has stopped, use the EAST and WEST buttons to readjust your dish pointing direction, until you
obtain a signal, then the AUTOFOCUS button, to look for the optimal receiving position.
Press OK to choose another satellite and check your dish-pointing direction again, or RETURN to go
back to the MOTOR SETTING menu.
Several operations are then possible :
- RECALCULATE ALL THE MOTOR POSITIONS when you use your equipment for the first time.
- SAVE THE CURRENT MOTOR POSITION if, after recalculating the position, it was necessary to
realign the dish manually, using the EAST/WEST keys, in order to obtain an optimum signal on a
given satellite.
- DO NOT SAVE THE CURRENT POSITION if you just desire to monitor dish alignment.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aston xena 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aston xena 2000 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aston xena 2000

Aston xena 2000 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info