424615

Aston xena 2000 Manual

9
Zoom out
Zoom in
Previous page
1/37
Next page
5.3 SATELLITE ACTIVATION AND PROGRAMMING
Before using your equipment, you will need to choose the satellites you wish to install. All the satellites preset are
selected and active, by default.
• In the PROGRAMMING menu, select SATELLITE PARAMETERS
• To select or deselect a satellite, use keys 5 and 6 to move the cursor to the satellite desired, then press
OK to activate it. You can deactivate it by pressing OK again.
The active satellites are displayed in blue, and the number of active satellites is indicated bottom left.
• To modify the name of a satellite and to programme the type of search (analogue and/or digital) for
each satellite, use keys 5 and 6 to go to the satellite you wish to programme, then press the RED
button.
- Use the alphanumerical keypad to modify the name if necessary
- Activate or deactivate the analogue or digital search for each satellite (use keys 3 and 4).
• To add a new satellite to the list, choose a satellite of the of the SATxx type at the end of the list (use
keys 5 and 6) then press the RED button.
- Use the alphanumerical keypad to enter the name of the new satellite.
- Use the alphanumerical keyboard and keys 3 and 4 to programme the angle and the direction of
the satellite
- Activate or deactivate your analogue or digital satellite search (use keys 3 and 4)
Press OK to enter, or R if you do not wish to save the modifications.
• To change search rates :
- Choose the satellite you wish to programme (use the keys 5 and 6)
- Press the GREEN button
- Select the rate to be modified (use keys 3 and 4)
- Use the alphanumerical keypad to enter the search rate
- Activate or deactivate the rate (use keys 3 and 4)
- Press OK to enter your settings or R if you do not want to save the modifications.
Search rates for each satellite are already preset in the factory. It may happen that operators modify them.
When you have finished activating and programming your satellites, press SAVE to enter your selection.
The total number of satellites activated is indicated bottom left. This number should be at least equal to the
number of satellites you wish to use.
For each satellite, the corresponding parameters will be displayed in the right-hand window. You can
modify these parameters and eventually configure a new satellite (in addition to the 31 satellites provided by
default, you can create 18 more, as indicated at the beginning of chapter 5.3).
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aston xena 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aston xena 2000 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aston xena 2000

Aston xena 2000 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info