628507
106
Zoom out
Zoom in
Previous page
1/112
Next page
EF1210 U
SER
M
ANUAL
A-14 http://www.aspi.com Copyright © 1999, All Rights Reserved
i. Adjust CODEC output level. Adjust it to -10 dBV (-8 dBu) or to 0dBu to match
the level required by your CODEC.
ii. Once you have completed T
O
CODEC calibration (you may have skipped this
step if you are not using playback and record), click on the Next button to pro-
ceed to Zone/Reference setup.
C
ALIBRATION
S
TEP
5: Z
ONE
/R
EFERENCE
S
ETUP
For Calibration Step 5, the S
TEP
I
NDICATOR
will be lit in the fifth position.
During Calibration Step 5, you may set the EF1210 to use different AEC Reference
Inputs for each channel. The reference signal used with channel 1 will be used as
Zone A output, and the reference used with channel 8 will be used as Zone B output.
Microphones on the input channels must be placed in the sound field of the appropri-
ate Zone output for the EF1210 to operate correctly; otherwise echoes will not be can-
celled. In other words, if for example the microphone on channel 3 is in the
soundfield of the loudspeaker connected to the Zone B output, channel 3 must be con-
figured to use Reference B (AEC B) as its reference.
Note.
The CODEC output level is also adjustable from -20 dBu to 0 dBu
using the UP and DOWN arrows on EFPanel.
Figure 27.
Step 5: Zone/Reference Setup
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aspi EF1210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aspi EF1210 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aspi EF1210

Aspi EF1210 Additional guide - English - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info