628507
30
Zoom out
Zoom in
Previous page
1/112
Next page
EF1210 U
SER
M
ANUAL
28 http://www.aspi.com Copyright © 1999, All Rights Reserved
Two Methods of
Calibration
The EF1210 can be calibrated two ways: calibrating with a computer or without. We
recommend using a computer for calibration because it is an easier procedure and it is
more precise. If you have a computer, please refer to our on-line document for com-
puter calibration procedures. See “Calibrating With a Computer” below for our web
address. If you do not have a computer, please refer to ““Calibrating Without a Com-
puter” on page 28” for front panel setup.
C
ALIBRATING
W
ITH
A
C
OMPUTER
Included in your shipment of the EF1210 is a diskette containing the EFPanel Control
Software and a PDF version of the EFPanel User Manual, which includes installation
instructions. Install EFPanel and use it to calibrate the EF1210 with a computer.
Also included is a hardcopy of this manual. This control software and manual may be
changed and updated periodically, so please visit our website at http://www.aspi.com
for the most recent versions.
C
ALIBRATING
W
ITHOUT
A
C
OMPUTER
In Calibration mode, the S
ETUP
LED will blink to let you know which setup step you
are currently executing. The different modes are shown in Table 3 below. Press the
A
UX
I
N
L
EVEL
/S
ETUP
button to move from one Calibration step to the next. When
you have finished Calibration Step 5, press the A
UX
I
N
L
EVEL
/S
ETUP
button again to
exit Calibration mode; any changes that you made will be saved as the default power-
on settings when you exit the Calibration procedure.
If you miss a Calibration step or lose your place and get to the wrong Calibration step,
you may either continue and come back to the missed step later or exit Calibration
mode (by pressing A
UX
I
N
L
EVEL
/S
ETUP
button repeatedly until the S
ETUP
LED is no
longer illuminated), re-enter Calibration mode, and resume Calibration at the step that
you missed. If you wish to exit Calibration mode and discard any changes that you
made, you must cycle power on the EF1210 before exiting Calibration mode.
Figure 10. Legend for calibration drawings.
C
ALIBRATION
M
ODE
M
IC
Input Calibration S
ETUP
LED blinks once per period
Z
ONE
Output Calibration S
ETUP
LED blinks twice per period
AEC R
EF
Input Calibration S
ETUP
LED blinks three times per period
Calibrating for Playback and Record S
ETUP
LED blinks four times per period
Zone/Reference Setup S
ETUP
LED blinks five times per period
Table 3: Visual indication of calibration mode.
Le
g
end:
LED Off LED On ButtonLED Blinking
SETUP
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aspi EF1210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aspi EF1210 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aspi EF1210

Aspi EF1210 Additional guide - English - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info