727248
46
Zoom out
Zoom in
Previous page
1/64
Next page
46
ERRORS – WHAT TO DO?
Disturbances from the environment (e.g. the power grid) may result in various error reports (see
Troubleshooting table). In such case:
• Switch o the appliance, wait for 1 minute, switch the appliance back on, and repeat the washing program.
If the error persists, call an authorized service unit.
You will be able to solve most of the problems in appliance operation by yourself (see Troubleshooting
table below).
Repairs may only be carried out by an adequately trained person.
Repair or any warranty claim resulting from incorrect connection or use of the washing machine shall not be
covered by the warranty. In such cases, the costs of repair shall be charged to the user.
The warranty does not cover the errors or failures resulting from disturbances from the environment
(lightning strike, power grid failures, natural disasters etc.).
Problem/error Cause What to do?
Washing machine
door does not open.
Water level too high. Drain the water using the Drain or Spinning
program. See "Step 5: Choose the program".
Water temperature in the
washing machine is too high.
Wait for the water temperature to drop and pump
out the water. If you still cannot open the door, use
the emergency door opening tool (see chapter
"ERRORS – WHAT TO DO? / Manual opening of
washing machine door").
Washing program is
not in progress.
Washing machine door is not
properly closed.
Firmly press on the washing machine door until
you hear two clicks when it is closed.
There is no voltage in the
power outlet.
Check if the plug is connected to the power outlet
and whether there is electric current (or voltage) in
the outlet.
Delayed start function has
been selected.
To cancel the delayed start function, press the
Start button and hold it for three seconds.
Washing time
is longer than
anticipated (the
time is regularly
updated on the
display unit).
Low inlet water temperature. Program duration can be up to 60% longer than
initially anticipated in the normal progress.
UKS* (*unbalance system)
stability system engaged due
to unevenly distributed laundry.
Program time is extended due to the need to
redistribute the laundry in the drum.
Low mains voltage. Washing machine needs more time because the
power mains voltage is too low.
Power supply failure. Program time is extended by the duration of the
power supply failure.
Display does not
light up.
There is no voltage in the
appliance.
Check if the plug is connected to the power outlet
and whether there is electric current (or voltage) in
the outlet.
The wording on the
display unit is not
in your language.
You have not selected your
preferred language yet.
Choose the preferred language (see "STEP 5 /
Settings / Choosing the language").
Wet laundry
("unbalance" will
appear on display)
A small amount of laundry will
often be unevenly distributed.
Loosen and redistribute the laundry and select the
Drain or Spinning program.
Increase the amount of laundry in the washing
machine and restart the program (see "STEP 7:
Start the wash / Adding or removing laundry after
the start of the program").
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko W6098XW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko W6098XW in the language / languages: English as an attachment in your email.

The manual is 13.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Asko W6098XW

Asko W6098XW User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info