736692
31
Zoom out
Zoom in
Previous page
1/48
Next page
31
Mulching blade(6)
The mulching blade and the fastening parts
must be changed
when one of the wear marks (1) was
reached.
when the thickness of the blade at the rear
edge(2) or at any other point is below 1mm
(exception: cutting edge).
Original blade
An original AS-blade is engraved with:
AS XXXXXXXX
The engraving shows the spare part number.
Checking the condition of the cutting blade
screws
Warning
When a screw head is worn, the cutting
blades can become loose.
Check all screws used for fastening the
cutting blades!
Fig.11:
The screw head (3) wears off during mowing
and must be replaced at the latest when it is
down to a thickness of 2 mm.
To prevent unbalance replace the cutting blade
screws in pairs only!
Checking the blade clutch
Check the blade clutch for proper function by
disengaging the blade. The blade must come
from full speed to a standstill in less than
5seconds. Contact an authorised service
centre if this is not the case.
Maintaining the engine
Warning
If the speed of rotation is set too high, ob-
jects can be ejected. The engine can be
damaged and noise pollution increases.
Do not change the basic setting of the
carburetor or the speed control.
The engine manufacturer has prepared the op-
erating manual of the engine. The manual con-
tains all maintenance requirements and war-
ranty conditions for the engine. If warranty
work at the engine is required, contact your au-
thorised service centre or the next authorised
dealer for engines.
To ensure a long service life of the engine, suf-
ficient engine cooling is required.
Keep the
- engine cover (ventilation grid),
- silencer (protective grid) and
- cooling fins of the engine
clean at all times.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4WD in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4WD

AS Motor AS 940 Sherpa 4WD User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info