736692
21
Zoom out
Zoom in
Previous page
1/48
Next page
21
Engaging the blade
Warning
Risk of injury due to rotating blade.
Make sure that no persons, children, an-
imals or objects are in the danger area.
Warning
Risk of injury caused by ejected objects.
Never mow when persons, children, pets
or material assets are in the danger
area.
Only engage the blade when it can rotate
freely and does not touch objects or the
ground.
Do not engage the blade in uncut grass be-
cause when overloaded, the blade can be
damaged or wear prematurely.
1. Start the engine.
2. Move the lever for the cutting height adjust-
ment to the highest cutting position.
3. Press the blade brake clutch lever slowly
forward – the blade starts up.
4. Set the desired cutting height.
If you set the cutting height during mowing to
transport position, the blade is automatically
disengaged.
Disengaging the blade
1. Move the blade brake clutch swiftly to the
rear.
Oil pressure switch
Warning
If the device, while in use, stops in steep
terrain or the engine cuts out, the device
can roll away.
Immediately actuate the parking brake to
prevent the device from rolling away.
The oil pressure switch ensures that the en-
gine is not damaged when the device is used
in steep terrain.
The oil pressure switch switches off the engine
when damage to the engine may occur due to
lack of oil pressure. This may occur when:
Oil level is too low.
The device is in too steep a sloping position
while in steep terrain.
How steep the gradient for the oil pressure
switch to switch off the engine may be de-
pends on the engine type, direction of inclina-
tion, and the oil level.
In order to restart the engine, let the device roll
to terrain that is less steep while in idle state.
In every case, check the oil level.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4WD in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4WD

AS Motor AS 940 Sherpa 4WD User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info