736692
20
Zoom out
Zoom in
Previous page
1/48
Next page
20
Starting
Warning
During startup, there is a risk of injury due to
rotating blades.
Make sure that nobody is in the danger
area of the blade.
Warning
Danger of poisoning due to poisonous ex-
haust gases.
Do not operate the engine in closed or
insufficiently ventilated rooms.
Please observe the safety instruction re-
garding the poisoning risk.
Safety switches
The device is equipped with safety switches.
To be able to start the engine, the following
conditions must be met:
There is a driver in the driver’s seat.
The blade clutch is switched off.
The drive lever is in neutral position.
If the engine is running and the driver leaves
the seat, the engine is shut down.
If the engine died due to tripping of a safety
switch, turn the ignition key to position “Ignition
off”. That way you avoid that the battery is de-
pleted.
Starting the engine
Start the device only when on level and firm
terrain.
1. Open the fuel valve.
2. Open the tank ventilation.
3. Sit down on the driver’s seat.
4. Switch off the blade clutch.
5. Move the lever for the cutting height ad-
justment to transport position.
6. Move the drive lever to neutral position.
7. When the engine and outside temperat-
ures are cold:
Move the accelerator lever to the cold
start position (choke).
When the engine is warm:
Move the accelerator lever to middle posi-
tion.
8. Turn the ignition key to starting position.
9. Once the engine has started, release the
ignition key.
10. Only after cold start:
Move the accelerator lever to middle posi-
tion.
11. For mowing, set the accelerator lever to
the maximum speed.
If the engine has not started after 5seconds,
release the key. Wait for approx. 15seconds
before you try to restart the device.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4WD in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4WD

AS Motor AS 940 Sherpa 4WD User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info