736695

AS Motor AS 940 Sherpa 4 WD RC Manual

52
Zoom out
Zoom in
Previous page
1/60
Next page
Troubleshooting
52
Error codes
When the control detects an error, the error code is displayed.
The following table lists the most frequent error codes. Contact an authorised service centre when an error code is displayed
that you cannot find in this table.
Display Designation Reasons Remedy
A1 Seat contact closed in the
RC mode
Seat contact actuated by driver in the RC
mode.
No passengers allowed in the RC mode.
Seat contact actuated by third person in
the RC mode.
No passengers and passenger transportation
allowed in the RC mode.
Seat contact actuated by objects in the
RC mode.
Remove objects from the seat.
Selection lever operating modes is not
completely set to MC.
Fold the selection lever operating mode all
the way.
A2 Transmitter in transmitter
holder in the RC mode
Transmitter in transmitter holder in the
RC mode
Remove the transmitter from the transmitter
holder.
Actuate the magnetic switch with a mag-
net at the transmitter bottom.
Remove the magnet.
Selection lever operating mode is not
completely set to MC.
Fold the selection lever operating mode all
the way.
A3 Emergency stop switch of
the machine actuated
Emergency stop switch actuated. Unlock the Emergency stop switch by turning
clockwise.
Fuse no. 5 (10 A) has blown. Eliminate cause for triggering the fuse and
replace fuse.
A4 Blade engaged when oper-
ating mode is changed
(RC->MC)
Blade was engaged while the selection
lever was switched from RC to MC.
Prior to switching, disengage the blade.
A5 Transmitter not in transmit-
ter holder and drive lever
not in middle position (MC)
Transmitter not in transmitter holder. Insert the transmitter into the transmitter
holder.
Transmitter not properly in transmitter
holder.
Properly insert the transmitter into the trans-
mitter holder (see operating manual).
A7 Transmitter not in transmit-
ter holder and blade not en-
gaged (MC)
Transmitter not in transmitter holder. Insert the transmitter into the transmitter
holder.
Transmitter not properly in transmitter
holder.
Properly insert the transmitter into the trans-
mitter holder (see operating manual).
A8 Seat contact not closed
and drive lever not in
middle position (MC)
Driver does not sit on driver’s seat in MC
mode.
Have the driver sit down on the seat.
Driver does not sit properly on driver’s
seat in MC mode.
Have the driver sit down properly on the seat.
Driver does not weigh enough to actuated
the seat contact.
Select a suitable driver.
Fuse no. 5 (10 A) has blown. Eliminate cause for triggering the fuse and
replace fuse.
A9 Emergency stop caused by
inclined position
Emergency stop caused by inclined posi-
tion (device tipped over).
Recover device.
Emergency stop caused by strong vibra-
tions and impacts.
Drive slower in uneven terrain. If required,
lower the tire pressure.
Bonnet loose or opened. Close/fasten the bonnet.
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4 WD RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4 WD RC in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4 WD RC

AS Motor AS 940 Sherpa 4 WD RC User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info