736695
46
Zoom out
Zoom in
Previous page
1/60
Next page
Assembly
46
Assembly
Scope of delivery
The device is shipped in a carton on a pallet. The scope of
delivery included:
The device.
The transmitter with batteries, belts and 2 keys for the
start-stop switch.
Steering wheel.
Tool bag with small parts.
This operating manual.
Manufacturer’s certificate.
Operator’s manual of the engine manufacturer.
Operating instructions for receiver and transmitter.
Unpacking
1. Remove the box.
2. Check the air pressure of the tires (see Technical data).
3. Insert the batteries into the transmitter (see Checking and
changing the battery).
4. Attach the belt to the transmitter.
5. Remove the spare key and keep it in a safe place.
Mounting
Mount the steering wheel:
1. Insert the screw(1) through the steering wheel and the
steering column.
2. Tighten the central fixing screw(3).
3. Screw the nut(2) onto the screw(1).
4. Fit the cap(4).
Storage
Warning
Danger of poisoning due to poisonous exhaust gases.
► Do not operate the engine in closed or insufficiently
ventilated rooms.
► Please observe the safety instruction regarding the
poisoning risk.
Warning
Fire hazard
Parts of the device can become extremely hot during oper-
ation and this may cause fire.
► Please observe the safety instruction regarding the fire
risk.
Warning
There is a risk of injury in case of unauthorised use.
► Press the start-stop switch on the transmitter, remove
the key and switch off the main switch when you do not
use the device any longer.
Storing the device
Keep the device in a closed, dry, and well ventilated room
and out of reach of children. Always eliminate all problems of
the device before you store it so that the device is always in a
safe-to-operate state. Let the engine cool down before you
store the device in closed rooms.
Also observe the notices on storage in the attached operating
instructions by the engine manufacturer.
Longer storage
1. Observe the safety instructions for handling the fuel.
2. Emptying fuel tank: Place a piece of hose onto the fuel
valve and let the fuel run into an approved fuel container.
3. Emtyping carburetor: Start the engine and let it run until it
stops by itself.
4. Thoroughly clean the device.
5. Touch up any possible damage to the paint finish (for
paint, see Accessories).
6. Remove the key from the transmitter and store it separ-
ately from the device.
7. Remove the batteries from the transmitter.
Before longer storage, e.g. in the fall, have an authorised ser-
vice centre check the device!
Also observe the notices on storage in the attached operating
instructions by the engine manufacturer.
Restarting
If you want to start the device after a longer storage, carry out
the tasks described in chapter Maintenance.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4 WD RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4 WD RC in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4 WD RC

AS Motor AS 940 Sherpa 4 WD RC User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info