736695

AS Motor AS 940 Sherpa 4 WD RC Manual

10
Zoom out
Zoom in
Previous page
1/60
Next page
Safety instructions
10
Mowing surfaces with fire hazard
– Carry a sufficient amount of suitable extinguishing media.
– If the device leans too much to the side, fuel can leak from
the carburetor or the tank. This presents a fire hazard!
– Observe the moved area even after mowing to make sure
that no fire breaks out.
To prevent a fire hazard, always keep the following compon-
ents free of dirt, grass, hay, leaking oil, grease, etc.:
– engine, ventilation grid
– silencer (manifold, protection, spaces)
– battery, cable connections, electric drive units
– area around the fuel tank
– belt drives
Driving on slopes
If the device, while in use, stops in steep terrain or the engine
cuts out, the device can roll away. Immediately activate the
parking brake to prevent the device from rolling away.
Observe the information regarding the oil pressure switch in
chapter Starting.
Sliding and tipping risk
Fig.2:
There is a risk of injury during driving on slopes due to tipping
over or sliding. Please observe the following notices.
– Use the device in the ride-on mode (MC) only on less than
21° slopes.
– Use the device in the remote control mode (RC) only on
less than 33° slopes.
– Observe the notices for the danger area and the operating
modes.
– Never unlock the drive on a slope because the device can
roll away.
– Always drive uphill and downhill, never drive crossways to
the slope.
– Never drive on a slope that you cannot drive up backwards
without sliding.
– Be extremely cautious when changing the direction.
– Do not turn on a slope.
– Prior to entering the slope, always activate the differential
lock. Move on slopes only when the differential lock is ac-
tivated.
– Always keep the speed low when moving on slopes.
– Do not start abruptly and do not brake abruptly.
– In the MC mode, hold the steering wheel tightly so that the
device does not swerve.
– In both operating modes, drive with the bow raised. If the
device tips over, the bar can prevent the device from
rolling.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4 WD RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4 WD RC in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4 WD RC

AS Motor AS 940 Sherpa 4 WD RC User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info