736687
31
Zoom out
Zoom in
Previous page
1/52
Next page
31
Checking the parking brake
Warning
If the parking brake is not properly adjusted,
the device can roll away.
Make sure that the parking brake always
functions correctly.
1. Place the device on a surface with a good
grip (e.g. concrete or asphalt).
2. Switch off the engine.
3. Let the device cool down for at least
20minutes.
4. Unlock the drive.
5. Activate the parking brake.
6. Try to push the device.
If the rear wheels lock up, the parking brake is
set correctly. If the device can be pushed, the
parking brake must be readjusted by an au-
thorised service centre.
Checking the foot brake
Check if the drive lever return to STOP when
the brake pedal is actuated.
Grease lubrication
3
4
1
2
7x4
6x4
5
Fig.11:
On the lubrication chart, the position of the
grease nipples are marked.
1. Clean the grease nipples.
2. Lubricate the grease nipples with a hand
grease gun(1-2 strokes).
3. Remove any excess grease that has
squeezed out from the bearing points.
Checking the blade
Danger
Improperly mounted and maintained blades
pose a severe injury hazard.
Work at the blade shall only be per-
formed by an authorised service centre.
Use solid gloves when you check
the blade.
Work at the blade requires specific expertise
because an unbalance inspection is necessary
and the torques must be observed.
Check the blade and all fastening elements for
wear, damage and cracks
each time before and after you mow.
if there are noticeable changes.
All shown blade parts and their fastening ele-
ments must be changed
if damage or cracks are detected.
at least once a year or every 50 operating
hours, no matter if wear does exist or not.
The material weakens, can suffer cracks,
endangering people and material assets.
Vibrations are an indication that
the blade is worn excessively or on one side
or
damage to the engine or cutter deck fasten-
ing.
Blades that are sharpened improperly increase
the workload of the devices and can result in
vibration cracks or breaks.
Ejected broken pieces can cause severe injur-
ies.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 900 Enduro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 900 Enduro in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 900 Enduro

AS Motor AS 900 Enduro User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info