736687
30
Zoom out
Zoom in
Previous page
1/52
Next page
30
Cleaning the device
Depending on use, clean the device thor-
oughly, especially the bottom and the blade.
Grass cuttings and dirt that are stuck interfere
with the grass ejection and impair the cutting
quality. To sufficiently cool the engine, keep
the engine cover, ventilation grid and engine
clean.
Fire hazard! Take particular care that the com-
ponents at the silencer are clean.
For cleaning, use a hand brush. Remove stub-
born dirt with a wooden or plastic spatula.
Clean the outside housing parts with a cloth.
Do not clean the device with water spray or
high-pressure cleaner! Do not use any ag-
gressive cleaning agents.
General inspection
To make sure that the device can be operated
safely, check all nuts, bolts, screws, rubber
elements, air filters, connections of fuel lines,
etc. regularly for proper condition and firm
seating. Check the ignition wire and the spark
plug connector for damage.
Immediately replace damaged or worn parts,
especially covers, silencers or fuel tank
(authorised service centre).
Check all parts that that contain fluids for leaks
and proper condition. These can be: Fuel tank,
fuel valve, fuel lines, carburetor, engine, gears,
battery, hydraulic system.
In case of leaks, contact an authorised service
centre.
Checking the safety functions
Check the safety switches for proper function.
It must not be possible to start the engine
when:
there is no driver on the driver’s seat.
The blade clutch is switched on.
The drive lever is not in neutral position.
If the engine is running and the driver leaves
the seat, the engine must shut down.
Operating hours counter
When you press the button at the operating
hour counter, the display will alternate
between:
Operating hours
Hours before the next engine oil change
(OIL)
Hours before the next grease lubrication of
the device (LUBE).
The intervals in the maintenance table and in
the operating instructions of the engine manu-
facturer apply.
The specifications for the next engine oil
change and the next grease lubrication at the
operating hour counter serve only as additional
reminder.
If the display flashes showing the text "OIL" or
"LUBE", check the information in the mainten-
ance table regarding oil change or lubrication.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 900 Enduro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 900 Enduro in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 900 Enduro

AS Motor AS 900 Enduro User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info