736687
22
Zoom out
Zoom in
Previous page
1/52
Next page
22
Re-engaging:
1. Switch off the blade clutch lever.
2. Move the lever for the cutting height adjust-
ment to the highest cutting position.
3. Move the accelerator lever to middle posi-
tion.
4. Switch on the blade brake clutch – the
blade starts up.
5. Set the desired cutting height.
Engaging the blade (AS980)
Only engage the blade when it can rotate
freely and does not touch objects or the
ground.
Do not engage the blade in uncut grass be-
cause when overloaded, the blade can be
damaged or wear prematurely.
1. Start the engine.
2. Move the lever for the cutting height adjust-
ment to the highest cutting position.
3. Move the accelerator lever to middle posi-
tion.
4. Switch on the blade brake clutch – the
blade starts up.
5. Set the desired cutting height.
When crossing over paths,
disengage the blade
1. Switch off the blade clutch lever.
Oil pressure switch
Danger
If the engine shuts down while you are
mowing, the device can roll away.
Immediately actuate the parking brake to
prevent the device from rolling away.
The oil pressure switch ensures that the en-
gine is not damaged when the device is used
in steep terrain.
The oil pressure switch switches off the engine
when damage to the engine may occur due to
lack of oil pressure. This may occur when:
Oil level is too low.
The device is in too steep a sloping position
while in steep terrain.
How steep the gradient for the oil pressure
switch to switch off the engine may be de-
pends on the engine type, direction of inclina-
tion, and the oil level.
In order to restart the engine, let the device roll
to terrain that is less steep while in idle state.
In every case, check the oil level.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 900 Enduro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 900 Enduro in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 900 Enduro

AS Motor AS 900 Enduro User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info