736687
21
Zoom out
Zoom in
Previous page
1/52
Next page
21
Starting
Danger
During startup, there is a risk of injury
caused by the rotating blade.
Make sure that no one is within the
danger zone of the blade.
Safety switches
The device is equipped with safety switches.
To start the engine, the following requirements
must be met:
A driver sits in the driver seat.
The blade clutch is switched off.
The drive lever is in neutral position.
If the engine is running and the driver leaves
the seat, the engine is shut off.
If the engine was shut down due to a safety
switch, turn the ignition key to position “Ignition
off”. By this, you will avoid discharging the bat-
tery.
Starting the engine (AS900,
AS915)
Start the device only when on level and firm
terrain.
1. Open the two fuel valves.
2. Sit down in the driver’s seat.
3. Switch off the blade clutch.
4. Move the drive lever to neutral position.
5. Move the accelerator lever to middle posi-
tion.
6. Pull out the lever for the choke.
7. Turn the ignition key to starting position.
8. When the engine has started, release the
ignition key and press the lever for the
choke back in.
9. For mowing, set the accelerator lever to the
maximum speed.
If the engine has not started after 5 seconds,
release the key. Wait for approx. 15 seconds
before you try to restart the device.
Starting the engine (AS980)
Start the device only when on level and firm
terrain.
1. Open the two fuel valves.
2. Sit down in the driver’s seat.
3. Switch off the blade clutch.
4. Move the drive lever to neutral position.
5. Move the accelerator lever to the cold start
position (choke).
6. Turn the ignition key to starting position.
7. Once the engine has started, release the
ignition key and move the accelerator lever
to middle position.
8. For mowing, set the accelerator lever to the
maximum speed.
If the engine has not started after 5 seconds,
release the key. Wait for approx. 15 seconds
before you try to restart the device.
Engaging the blade (AS900,
AS915)
Only engage the blade when it can rotate
freely and does not touch objects or the
ground.
Do not engage the blade in uncut grass be-
cause when overloaded, the blade can be
damaged or wear prematurely.
1. Start the engine.
2. Move the lever for the cutting height adjust-
ment to the highest cutting position.
3. Move the accelerator lever to middle posi-
tion.
4. Switch on the blade brake clutch – the
blade starts up.
5. Set the desired cutting height.
If you set the cutting height during mowing to
transport position, the blade is automatically
disengaged.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 900 Enduro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 900 Enduro in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 900 Enduro

AS Motor AS 900 Enduro User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info