736673
21
Zoom out
Zoom in
Previous page
1/40
Next page
21
Turning
Turn the device round only where the grass
has been mowed already.
Turning round on an even surface:
1. Switch off the drive and the differential lock.
2. Turn the device to the desired side.
3. Switch the drive and the differential lock
back on.
Turning round on a sloping area:
1. Disengage the blade.
2. Keep the drive switched on.
3. Switch off the differential lock.
4. Turn the device upslope.
5. Hold back the handlebar and the inner
wheel.
6. Switch the differential lock back on.
The drive prevents sliding and supports the
turn manoeuvre.
Pushing
1. Release the drive lever.
2. Put the gear in neutral.
3. Press the drive lever again towards the
handlebar – device can be pushed or rolls.
Differential lock
The differential lock connects the rear wheels
rigidly to each other. This improves traction
and driving stability of the device. The danger
of slipping is reduced and safe braking is made
possible.
When the differential lock is released, the
device can be steered and turned with ease.
Switching off and parking
Warning
On a slope, the device can roll away.
Put the device on even ground only or
secure it against rolling away.
1. Release the drive lever.
2. Set the accelerator lever to the lowest en-
gine speed.
3. Release the blade clutch lever.
4. Set the engine stop switch to "0".
5. Wait until the engine comes to a standstill
before you step away from the device.
6. Close the fuel valve and the tank ventila-
tion.
7. Pull off the spark plug connector.
Transport
Warning
Risk of injury due to the heavy weight of the
device. The device can fall over and fall
down and cause severe injuries.
Observe the following notices.
Transport the device on a freight vehicle or a
trailer which is designed for a carrying capacity
of at least as great as the empty weight of the
device.
Prior to transport, let the device cool down for
at least 20 minutes. Close the tank ventilation
and the fuel valve.
For transport, you can fold up the handlebar.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 73 4T B S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 73 4T B S in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 73 4T B S

AS Motor AS 73 4T B S User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info