736668
21
Zoom out
Zoom in
Previous page
1/48
Next page
21
Adjusting cutting height
Adjust the cutting height setting only when the
engine is switched off.
Set the cutting height so that the blade does
not touch the ground even in case of terrain
unevenness. If the cutting height is set too
high, objects can be ejected and the “clean cut
appearance” can be destroyed.
The adjustment of the cutting height is per-
formed per axle.
If the scale shows the same position for both
axles, the blade is parallel to the mowing area.
Front axle
The cutting height adjustment of the front axle
is infinitely variable.
1. Switch off the engine and wait until the en-
gine comes to a standstill.
1
Fig.5:
2. Turn the crank at the front axle until the de-
sired cutting height was reached.
ð The lubricating nipple (1) shows the set po-
sition on the scale.
Rear axle
AS 62 4T B&S
The height on the rear axle can be adjusted to
5 positions.
1. Switch off the engine and wait until the en-
gine comes to a standstill.
2 1
2. Slacken the nuts ( 1) and remove the
screws (2).
3. Lift the device to the desired height.
4. Insert the screws (2) into the hole from the
outside.
5. Tighten the nuts (1) on the screws(2).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 62 4T B S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 62 4T B S in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 62 4T B S

AS Motor AS 62 4T B S User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info