736661
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
Checking the drive
1. Place the device on a surface with a good
grip (e.g. concrete or asphalt).
2. Switch off the engine.
3. Actuate the drive.
4. Try to pull the device backwards.
If the rear wheels block, the drive is set cor-
rectly. If you can pull the device, the drive must
be readjusted.
AS532TES4WDRB
1
AS532TES4WD
1
Fig.9:
Re-adjusting the drive
1. Release the drive lever.
2. Unscrew the adjusting screw (1) until the
wheels lock while the drive lever is pulled
and you are pulling the device.
If the adjustment does not show any improve-
ment, have an authorised dealership check the
device.
Checking the reverse gear
1
1. Put the device on a non-slip surface (e.g.
concrete or asphalt).
2. Switch off the engine.
3. Actuate the reverse gear.
4. Try to pull the device backwards on its front
wheels.
If the front wheels lock, the reverse gear is cor-
rectly adjusted. If you can pull the device, the
reverse gear must be re-adjusted.
Re-adjusting the reverse gear:
1. Release the lever for the reverse gear.
2. Unscrew the adjusting screw (1) to the
point where the cable has no play.
If there is no improvement after the adjust-
ment, have the device checked by an author-
ised service centre.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 53 2T ES 4WD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 53 2T ES 4WD in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 53 2T ES 4WD

AS Motor AS 53 2T ES 4WD User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info