707157
79
Zoom out
Zoom in
Previous page
1/88
Next page
8.10. Customize the Keyboard
KeyLab mkII's keyboard can also be modified using the MIDI Control Center.
: Settings related to Part 2 and the Split Point are only shown when Split mode is set to On. Also,
any parameters that are set to
Part 2
or
Both
will be ignored from the KeyLab mkII unless Split mode =
On.
Part 1 Channel: Select the output MIDI channel for Part 1, between 1 and 16. This
can also be set to “User”, which will make Part 1 output to the MIDI channel
selected for the MIDI Ch button [p.63].
Part 1 Semi: This parameter is used to set the chromatic transposition amount
for Part 1. This can be set in semitones, from -11 to +11.
Part 1 Octave: This parameter is used to set the octave shift amount for Part 1.
The range is -3 to +3 octaves.
Velocity Curve: Three settings are available: Linear (Lin), Logarithmic (Log), or
Exponential (Exp). This setting applies to both Part 1 and Part 2.
Split Mode: When set to Off, Part 1 is the only active Part and the rest of the
parameters in this list are hidden. When set to On, Part 2 becomes active and
the rest of the parameters in this list are revealed. Part 1 is on the right side of the
split; Part 2 is on the left side of the split.
Split Point: Allows you to set the split point between Part 1 and Part 2.
Part 2 Channel: Select the output MIDI channel for Part 2, between 1 and 16. This
can also be set to “User”, which will make Part 2 output to the MIDI channel
selected for the MIDI Ch button [p.63].
Part 2 Semi: This parameter is used to set the chromatic transposition amount
for Part 2. This can be set in semitones, from -11 to +11.
Part 2 Octave: This parameter is used to set the octave shift amount for Part 2.
The range is -3 to +3 octaves.
Oct buttons assign: Specify whether the Octave buttons will shift Part 1 or Part 2.
Trans button assign: Specify whether Part 1 or Part 2 can be transposed.
Chord button assign: Choose whether Part 1 or Part 2 will play the chord stored
on the Chord button. This also affects which half of the keyboard will work with
the pads when they are in Chord Transpose mode.
Aftertouch assign: Select whether aftertouch is active for Part 1 or Part 2.
: The keyboard aftertouch curve can be specified on the Device Settings tab. It is a Global
parameter, which means it is not stored as part of the Template.
Arturia - User Manual KeyLab MkII - MIDI Control Center 74
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arturia Keylab MKII 61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arturia Keylab MKII 61 in the language / languages: English as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arturia Keylab MKII 61

Arturia Keylab MKII 61 User Manual - German - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info